TUFF COAT FLEXI is a single component, elastomeric, acrylic waterproofing and protective coating.COVERAGE: 1 kg for 2.3m2 for 3 coat(including Primer Coat) to get a Dry Film thickness approximate of 1 mm.
Single Component , Easy to Apply , Protects exposed concrete structures against , Carbonation and ingress of atmospheric gases and salts , Good UV resistance ,Elastomeric – high crack bridging capability.
1 , 5 , 20 (kgs)
TUFF COAT PUD is a liquid applied elastomeric waterproof and protective coating based on polyurethane dispersion (PUD).COVERAGE : 1 kg for 2.3m2 for 3 coat(including Primer Coat) to get a Dry Film thickness approximate of 1 mm.
Ready to apply single component product.Forms a highly elastomeric, tough and resilient membrane.Environment friendly.Fast surface hardness, no tack surface, low dirt pick-up.Excellent crack bridging properties.Exhibits high resistance to weather conditions and good resistance to UV radiation.
1 , 5 , 20 (kgs)
TUFF COAT RB1100 is cold applied liquid waterproofing membrane, specially designed from a blend of special resin and rubber, reinforced with special water repelling fillers, minerals stabilizers.COVERAGE: 1 kg for 2.3m2 for 3 coat(including Primer Coat) to get a Dry Film thickness approximate of 1 mm.
Ready to use single component.Is a highly elastic product, and cures to a rubber like membrane capable of withstanding severe cases of expansion, contraction and deck movements.Highly resistant to oxidation, UV light and ozone because of unique additives used in compounding it.It does not crack.More durable than normal asphalt coating and lasts longer than most other coatings.
1 , 5 , 20 (kgs)
TUFF COAT WBC is emulsified bitumen coating, which dries to form a tough, seamless, flexible vapor proof protective coating. It is used as a protective coating for cladding works to prevent infiltration of vapor and moisture into the building structure.COVERAGE: 1 kg for 2.3m2 for 3 coat (includingPrimer Coat) to get a Dry Film thickness approx of 1 mm.
TUFF COAT WBC is a single component , Water based ,Cold applied , Easy to apply and economical, Anti-fungal & odorless, Can be applied on damp substrates, Asbestos free, Can be applied in closed or confined spaces, Low voe, Resistant against chloride and sulphate ions.
1 , 5 , 20 (kgs)
TUFF GUARD (FC) is a high performance two component waterproof Flexible Grey colour Coating. Coverage:- 6 -8 sq. ft. / Kg. in 2 coat application.
It is available in pre weighted factory controlled pack to be mixed on site, TUFF GUARD (FC) forms tuff flexible film in gray colour, Can be applied on both horizontal & vertical surface, Ideally suited for application in sunk slab, water tanks, terrace, slopping slab, asbestos sheet, chajjas, & vertical walls.
10 kg powder + 5 kg liquid
TUFF REPELL is excellent water repellent for external use with improved self cleaning properties.Coverage :- 7m2 – 9m2 per liter.
It protects formation of algae, fungus and dampness and acts as raincoat for exterior surface. Ideal for exposed brick work, stone work, concrete blocks, coating over paint, etc.
1 , 5 , 20 , 50 (kgs)
TUFF GUARD CLEAR is acrylic resin based single component, transparent, ready to use protective coating.Coverage:- 40 – so sq.ft. per lit.
It has excellent bonding, protects external paint, reflects U.V. rays, avoids fungus, moss growth, it can also be applied on marble chips on terrace, does no affect aesthetic effect of paint.
1 , 5 , 20 , 50 (kgs)
TUFF BOND CRETE is a white liquid Acrylic Polymer admixture with modified plasticizing additives for waterproof bonding agent OR admixture for mortar. Dosage : 200gms per bag of Cement. (as admixture) Mixing 1 :1 ratio with cement for waterproof coating
For mixing in Structural polymer modified repair mortar.Waterproofing of building terrace, toilet sunken portion, basements, water tanks, swimming pools, Bridge decks, etc.
5 , 25 , 50 , 220 (kgs)
Copyright © 2018 All Rights Reserved by Tuff-Rock Industries | Designed by Om Webinfotech